Galvanized Binding Wire Stitching Wire and Spring Wire

Electro Galvanized Wire for making Staple Wires for Pneumatic Stapler et Staple gun Tackers
Material: SAE 1006 & Q195.
Round diameter = 0.64 mm (Tolerance +/- 0.01 mm).
Tensile strength = (90 / 110 Kg/ mm²), 900/1100 N/mm².
Surface galvanized & smooth.
Zinc Coating: 13-18 g/m².
Packing=MP100 / 90 Kg

Zinc Wire 2.0 mm
Standard BS EN 1179:1996 ZN1.
Material: Zn-99.7% min.
Co - 0.002 max.
Cu - 0.001 max.
Fe - 0.001 max.
Pb - 0.01 max.
Sn-0.005 max.

Galvanized binding wire to pack recycled cardboard:
2.8 mm of diameter.
The wire must be wounded in coils of 45 kg to 50 kg aprox.

Straightened ferritic wire
Length: 40 mm.
Diameter: 0.5 mm.
Material: galvanized iron wire.

Galvanized steel stitching wire (flat)
Size:0.90 mm × 0.60 mm
Packing: 2 kgs/spool.
10 spools/carton.
Quantity: 1,200 kgs.

Galvanized steel flat stitching wire
Size: 0.80 mm × 0.60 mm.
Packing: 2 kgs/spool.
10 spools/carton.
Quantity: 4,000 kgs.

Electro galvanized steel binding wire 16 SWG (GI binding wire-Dia. 1.626 mm) low carbon steel with zinc coating 10-12 g/m², Quantity - 200 tonnes.
Packing size per roll 10 kg.
Usage of wire - using in substation.

Hot galvanized spring wire 600 - 900 kg/coil

• Diameter 2.0 mm, tensile Strength 2000-2200 MPa.
• Diameter 2.40 mm, tensile Strength 1920-2130 MPa.
• Diameter 2.50 mm, tensile Strength 1900-2100 MPa.
• Diameter 2.80 mm, tensile Strength 1860-2070 MPa.
• Diameter 3.0 mm, tensile Strength 1840-2040 MPa.
• Diameter 3.20 mm, tensile Strength 1820-2040 MPa.
• Diameter 3.60 mm, tensile Strength 1770-1970 MPa.
• Diameter 3.80 mm, tensile Strength 1750-1950 MPa
• Diameter 4.0 mm, tensile Strength 1740-1940 MPa.
• Diameter 4.20 mm, tensile Strength 1710-1900 MPa
• Diameter 4.50 mm, tensile Strength 1690-190 MPa.

Hot specifications of galvanized steel wire ordered by customers :

• Galvanized stitching wire 0.5 mm diameter, coil wrapped with plastic bag inside and gunny pieces outside.
• Galvanized binding wire G10/3 mm, G12/2.5 mm, G14/2.0 mm, G16/1.5 mm, G18/1.2 mm, G21/1.0 mm.
• Galvanised binding wire 21 gauge 5 kg roll for 25 tons.
• Galvanized binding wire specially size BWG22 (0.7 mm).
• 50 mtr × 1.5 mm galvanised binding wire.
• 40 Ft container load of 22 electro galvanised wire, each roll should be 8 kg.
• 5 ton of double wire tie for scrap truck tires bale tie, length 4 m.
• G.I Binding wire 20 gauge. 8 kg/roll.
• G.I Binding wire 20 gauge. 4 kg/roll.
• 2.032 mm electro coat wire, 680 kgs coils, 75-95 K PSI tensile, 14-20 % elongation.
• Galvanized steel stitching wire (flat) within a short time, diameter of wire is 0.9 mm & 0.8 mm.
• 2.00 mm Hot Dip GI wire and Binding wire BWG 18 ( Electro Galvanized wire).